Comments for Pelican Wire

Comment on Floor Heating Wire by Heater wire | Yumbath

Heater wire | Yumbath — Sun, 19 Feb 2012 21:31:00 +0000

[...] Floor Heating Wire | Pelican Wire [...]

Comment on Kanthal A-1 872 ohm Alloy by I'm looking to create a Coil oHm guide

I'm looking to create a Coil oHm guide — Wed, 01 Feb 2012 20:09:52 +0000

[...] giving ohmsft, in AWG and also shows x.xxx" diameter of the wire Nichrome Wire Kanthal A1 Kanthal A-1 872 ohm Alloy | Pelican Wire Kanthal D Could not find similar information for Kanthal D. You will have to do the leg work on [...]

Comment on Appliance Wire, UL by Appliance wire | Dminsitedemo

Appliance wire | Dminsitedemo — Fri, 27 Jan 2012 11:48:10 +0000

[...] Appliance Wire, UL | Pelican WireAppliance Wire, UL. UL Listed Pelican Wire Co. has multiple certifications for UL recognized appliance wire with temperature ranges from 80°C to 250°C using … [...]

Comment on Solid & Stranded Resistance Wire by Resistive wire | Teamsellers

Resistive wire | Teamsellers — Wed, 04 Jan 2012 07:53:11 +0000

[...] Solid & Stranded Resistance Wire | Pelican Wire [...]

Comment on 304 Stainless Steel 438 ohm Alloy by Stainless Steel Ohm

Stainless Steel Ohm — Mon, 19 Dec 2011 09:07:47 +0000

[...] 304 Stainless Steel 438 ohm Alloy | Pelican Wire 84% Copper, 12% Manganese, 4% Nickel. Physical Constraints. Specific Gravity: 8.193; Resistivity, ohms/cmf: 290; Density, lbs/cu. in ; Thermal EMF vs copper, microvolts/Deg. C, 0 to 100 Deg. C: <+3.0; Specific heat at 20 Deg. [...]

Comment on Advance by Copel resistor | Consultingavia

Copel resistor | Consultingavia — Mon, 05 Dec 2011 00:28:13 +0000

[...] Advance | Pelican WireSolid & Stranded Resistance Wire · Resistance Wire Alloys · Ribbon Wire · High Temperature … Advance / Copel / 300ohm constantan 55% Copper, 45% Nickel … [...]

Comment on Thermocouple Wire by New Question | Pelican Wire

New Question | Pelican Wire — Tue, 16 Aug 2011 13:30:00 +0000

[...] Thermocouple Wire [...]

Comment on Balco 120 ohm by Pelican

Pelican — Sat, 13 Aug 2011 07:04:23 +0000

This engine was recently rebuilt, about 20K miles ago. It frequently went on long trips back and forth from Lompoc to Los Angeles every weekend (about 150 miles). It is a 1.7 engine with stock components, and stock fuel injection. The owner of the car was driving north on a somewhat cool day a few weeks ago.

Comment on Manufacturing Process & Capabilities by admin

admin — Thu, 14 Jul 2011 21:45:28 +0000

fixed

Comment on Resource Center by admin

admin — Thu, 14 Jul 2011 21:45:01 +0000

got it.